DPA 4011 Cardioid Microphone

The DPA 4011 is a professional-grade cardioid microphone trusted by recording studios and live sound engineers worldwide. Engineered with state-of-the-art components, it delivers exceptional neutrality and accuracy with extremely low distortion.

Its cardioid polar pattern provides excellent rejection of off-axis sound, making it ideal for isolating vocals, instruments, and dialogue in demanding applications. Built for precision and reliability, the DPA 4011 performs consistently in both studio and live environments where sonic integrity is non-negotiable.

The DPA 4011 Cardioid Microphone is available in a compact version, or with an XLR connector mounted on either the rear or side of the microphone.

Features:

• Ultra-compact spot or hanging mic
• Close-miking
• Great for high sound pressure levels
• Accurate Sound
• Colourless sound
• Modular flexibility

Specifications:

• Directional pattern: Cardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
• Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range: Typ. 121 dB
• Max. SPL, THD 10%: 159 dB SPL peak
• Switchable attenuator, filters etc.: 0 dB / -20 dB
• Rated output impedance: 200 Ω
• Minimum load impedance: 2
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 60 dB
• Power supply (for full performance): P48 (Phantom Power)
• Current consumption: 2.8 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Weight: 158 g (5.6 oz)
• Microphone diameter: 19 mm (0.75 in)
• Capsule diameter: 19 mm (0.75 in)
• Microphone length: 170 mm (6.7 in)
• Maximum output voltage, RMS: > 5 V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Matching tolerance (frequency response and sensitivity): ±1 dB
• Phase deviation for kit: < 10°
• Colours: Matte black